Parking Lot Striping in Dallas, TX

Yes, Dallas commercial lots must comply with both federal ADA Standards and the Texas Accessibility Standards (TAS). Where TAS is stricter than federal rules, the Texas standard applies to your property.

If lines are faded or hard to see, your lot likely needs re-striping. The Dallas-Fort Worth heat accelerates paint fading, so markings that look acceptable in spring may be non-compliant by summer.

We apply stall lines, ADA accessible space markings, van-accessible designations, fire lane striping, directional arrows, crosswalks, stop bars, and pavement stencils. Each marking type is sized and placed to meet current code.

Federal ADA Standards require one accessible space per 25 total spaces for the first 100 stalls, and at least one of every six accessible spaces must be van-accessible. Your specific count depends on your total stall number and property type.

The Dallas Fire Code requires fire lane signs spaced no more than 50 feet apart on both sides of the lane, with sign bottoms mounted at 78 inches above grade. Fire lanes must also maintain minimum clearance widths for emergency vehicle access.

Yes, we design and stripe full lot layouts for new construction and properties changing their traffic flow. We measure the site, plan stall angles to maximize capacity, and apply all required markings before the lot opens.